Tips on Stretching Piercings and Gauging Earlobes

The following tips on stretching piercings are specifically aimed at gauging earlobes, where earlobe piercings can be enlarged to very large sizes to incorporate many different types of ear jewelry including awesome flesh tunnels.

Stretching piercings has been popular in many civilizations throughout history, taking many forms from gauging earlobes to stretching labret and septum piercings. In the very early periods of history the materials used were wood, stone, bone, horn, shells, claws and talons, shaped and carved to facilitate stretching piercings.

The oldest known incidence of humans gauging earlobes was discovered in 1991, in a glacier in the Otztal Alps between Italy and Austria, where a 5,300 year-old mummified body was found with tattoos and an earlobe piercing of between 7 mm and 11 mm diameter. Although the method used was known for definite, this may have been carried out by a method known as dead stretching, where progressively larger ear jewelry is forced through the hole that gradually increases in diameter.

Preparation

In preparation for gauging, make sure that you have a good anti-bacterial soap without perfume. Then you will need a sea salt solution – make it using three tablespoons salt in just enough water to dissolve it, and at least enough to bathe your earlobe in. Never use hydrogen or any other peroxide as antiseptic – the soap and salt solution are enough.

You will also need some warm water to bathe your ear with before each phase of ear stretching, or you could alternative have a warm shower first. This softens the ear and helps prevent tearing of the skin/scar that could lead to bleeding.

Finally, you will need some lubricant: avoid Vaseline or any other mineral oil or petroleum-based lubricant. Most tips on stretching piercings recommend emu oil and jojoba, each of which offers gentle antiseptic and skin conditioning properties while acting as a perfectly adequate lubricant.

Gauging Earlobes

When stretching piercings, the two recommended methods are the taper method and the Teflon method. The taper method involves inserting a tapered rod or pin into the piercing, the narrow end being of the same gauge as the piercing, and the broader end one gauge down. The size of the taper is that of the desired gauge of piercing. So if your piercing is 16g, the taper will be a 14g taper, ranging from 16g to 14g. These are equivalent to 1.2 mm to 1.6 mm.

Never use a taper any more than one step down. However, since piercing gauges are always even numbers, one step down is 16g to 14g or 12g to 10g. Also, as the gauge figures drop, the actual diameter increases. So while 16g is 1.2 mm, 10g is 2.4 mm.

There are a number of different types of taper, including a tapered pin on ear jewelry, so you simply insert ear jewelry tapering from your current gauge to the new one. The problem here is that a fully tapered pin will not stretch your ears evenly – the pin has to be of the same diameter all the way through, or your piercing might also be stretched with a taper.

To overcome that, you can use an insertion rod, which is a tapered rod of about 3 inches. After warming your ears with the warm water or shower, and washing them with anti-bacterial soap, apply the lubricant to the taper and slowly work it through. Once it reaches the thicker end, follow it through with ear jewelry of the new size, and you are done. Wipe off excess lubricant and clean the ear with anti-bacterial soap and then some of the salt solution.

An even safer way is to wind a layer of non-adhesive Teflon tape round the pin of your ear jewelry and push it through the lobe. If you can see any space at all when you pull on the ring, then you can safely do this. Wait until the ear has accepted it then do it again, and so on until you have reached the new size, when you can use larger ear jewelry.

If there has been any severe pain or the piercing bleeds, then you must stop immediately and allow the piercing to heal properly before trying again. If you try stretching piercings too soon, before they have fully healed, then you can tear the skin and even have a blowout, both of which will make it difficult to stretch again.

Gauging Earlobes: After-Care

After-care when gauging earlobes is fairly straightforward. It should not be so much a matter of tending after a piercing until it heals, but more keeping it clean, and turning the new sized jewelry now and again. You are waiting until the ear has accepted the new size of hole permanently so that you can perhaps change the hole diameter once more. The stretched skin has to be allowed to thicken and get harder – give about three times longer than your original piercing took to heal. If you want to use a flesh tunnel, then you can continue stretching piercings until the diameter reaches an appreciable size.

Done properly, and following the above tips, stretching piercings is safe and relatively easy to do. Many extend the diameter of their piercings this way, and gauging earlobes is likely the most popular form of pierce stretching carried out at the moment. Take your time – waiting is difficult, but if your ear is not ready for the next stretching it will likely be damaged.

Surgical Steel Body Jewelry – Three Reasons Why Surgical Steel Body Jewelry is Your Best Choice

Are you interested in wearing body jewelry to give you a unique, fashionable look? If so, you should be aware of the many types that are available, and which are safest and most durable. Here are three reasons why you should put surgical steel body jewelry at or near the top of your list…

Varieties Of Body Jewelry Available

Much like traditional jewelry, body jewelry comes in many different styles, compositions, and price ranges. The most common is gold and gold plated. Solid gold, of course, is more expensive than gold plated. Organic, plastic, and glass are other types you will see.

Also popular is silver and steel. These minerals are relatively easy for jewelry craftsmen to work with, so you will find a lot of these on the market. What is important to understand is which are safest for you, your skin, and your piercings.

In general, plated pieces are the most prone to giving you unwanted skin problems and infections. You can generally tell by looking at their price tag or by asking a few simple questions. Most body jewelry costing less than five to ten dollars is plated, either with gold, silver, or steel.

Then again, some pieces crafted from glass or plastic are also in this price range, so it is best to ask before you buy. Glass and plastic are safer than plated items, but they are nowhere near as durable as those made from surgical steel, for example. We always recommend surgical steel body jewelry, especially for those on a limited budget. Here are the three main reasons why…

Surgical Steel Helps You Avoid Skin Problems

Surgical steel is a very high grade metal, and as the name suggests, it is frequently used in the medical profession where hygiene and safety are at a premium. If you buy from a reputable online source, you will get the best grade of surgical steel available.

The key is avoiding possible skin irritations and painful infections from buying plated or cheap pieces. Common sense precautions also come into play, like not letting anyone else wear your jewelry, nor borrowing any from someone else.

Reasonable Cost

You can buy body jewelry for as little as one dollar, and some pieces with precious stones run several hundred dollars. If you are on a budget, surgical steel items are ideal. Typically, you can get a durable, good looking piece for fifteen to twenty dollars.

Further, items made from this type of steel are available for any area of your body. Because it is increasing in popularity, you will find more and more selection of interesting and unique designs.

Durability

Steel is one of the most durable elements you can buy. Surgical steel is even stronger, so the item you buy will last for years.

Many other varieties of body jewelry will chip, fade, or tarnish. This is especially true with plated gold, silver, and plastic. Given their other risks, plated items in particular will not provide you any long lasting value.

Summary

Of the many varieties of body jewelry available, we recommend surgical steel as one of the safest, most economical choices. In general, you can find pieces in the fifteen to twenty dollar range, without fear of skin irritations or infections from cheaper grade metals.

Also, items made with this type of steel will last indefinitely. You can expect to own a fashionable, trendy item you can enjoy for years.

Designing and Making Paper Items

There are several ways of decorating paper. Most of the techniques were born out of experimentation of the artist with the colours and other materials found in the environment. This implies that aside from those methods that will be detailed, every artist must endeavour to create new ways of designing paper items.

1. Marbling (controlled and uncontrolled)

2. Comb-pattern

3. Wax resist

4. Doodling

5. Spraying

6. Roller and twine pattern

7. Ink-blowing

1. Marbling (controlled and uncontrolled)

Marbling is a method of making decorative patterns on paper by transferring colour from the surface of a liquid onto paper. Tools and materials required for marbling include paper, brushes, thinner, basin or trough, various colours of oil paint, cooked starch, empty tins, stick, and water.

Controlled Marbling

Process:

1. Fill a trough with cooked starch in an even consistency.

2. Sprinkle different colours of oil paint on the starch.

3. With the aid of the stick, stir gently for the colours to mix on the surface of the starch in order to make the patterns.

4. Place paper flat on top of the starch and tap the back to remove trapped air.

5. Hold one edge of the paper and remove it by dragging it along the edge of the trough to remove the starch.

6. Excess starch is washed off with water and hanged to dry.

Uncontrolled Marbling

Process:

1. Fill a trough with water.

2. Sprinkle different colours on the water.

3. Stir in different directions for the colours to come together over water.

4. Place paper flat on top of the trough and tap the back to remove trapped air.

5. Hold one edge of the paper and remove it by dragging it along the edge of the trough.

2. Comb-pattern

The tools and materials are large brush, paper or hair comb, cooked starch, water, powder colours, paper.

Process:

1. Mix powder colour with cooked starch to an even consistency to form a thin paste.

2. The brush is used to paint paste over the entire surface of paper.

3. The comb is used in making rhythmic patterns on the sheet.

4. It is hanged to dry.

3. Wax resist

Tools and materials required for this paper pattern making technique include brush, crayon or candle, powder colour, paper.

Process:

1. A sheet of paper is folded and creased to create parallel lines.

2. Wax is used to draw lines within the folded lines.

3. Go over the lines for a second run.

4. Colours are mixed and painted over the waxed paper.

Another technique is to sprinkle molten wax on paper. It is painted over with any high key colour. Wax is sprinkled over again and painted over with a low-key colour. After drying it, place the paper between two sheets of newspaper and iron to remove the wax leaving the patterned design.

4. Doodling

The tools and materials used include pencil, colours, paper, and brushes.

Process:

1. Create doodles to cover the entire sheet. Doodles are scribbles make on paper without any forethought plan.

2. Different colours are mixed to paint familiar shapes created by the doodles.

3. Erase the extensions created by the pencil.

5. Spraying

Tools and materials used include spray diffuser or shoe brush, paper, colour, cut out shapes, natural objects.

Process:

1. Arrange the natural objects or patterned templates and maintain their positions with drawing pins on the sheet of paper.

2. Spray colours on the patterns using the spray diffuser or an empty pen barrel with a mesh held at one end.

3. Gently remove the drawing pins and the cut out patterns.

4. The sprayed patterns on the paper is left to dry.

6. Roller and twine pattern

Tools and materials used include paper, printing ink, two hand rollers, rags, twine, thinner, glass slab.

Process:

1. Twine is wound around one hand roller.

2. Printing ink is placed on glass slab and rolled over with the second roller.

3. Printing ink is transferred onto the twined roller by rolling it over the glass slab.

4. The inked twined roller is rolled over the paper from the edge to edge and covered all over.

5. The rollers are cleaned with thinner and a different colour is used to go over the already created pattern to give a two coloured effect.

7. Ink-blowing

Tools and materials used include ink, paper, and empty pen barrel.

Process:

1. Sprinkle the paint at different sections on the paper.

2. Blow the paint to sprinkle it in a hairstyle manner using the empty pen barrel.

3. Leave the paper to dry.

Decorative papers are used for making book covers, endpaper, wrappers, wallpaper, background for calligraphy etc.

The Different Types of Body Piercing

Here’s a short introduction to types of Body Piercings. You should get to know them before getting pierced. That way you can choose the type that is right for you.

Ear Piercing

Ear piercing is by far the most common piercing seen. Women have had their earlobes pierced for decades, and men have started to do the same within the last 40 years. The earlobe piercing is the most socially acceptable piercing. Most employers will allow at least one small earring in each lobe, barring safety reasons. This can be for simple decoration, or to show solidarity and a member of a social group. Military personnel, especially naval officers would pierce their left earlobe as a show of camaraderie Gay men used to pierce their right earlobe as a show of “gay pride.” This is no longer case. Men and women now pierce one or both earlobe, either once or multiple times as a matter of self expression.

Also common is cartilage piercing in the ear. Lesbians have begun piercing the right upper corner of their ear cartilage for the same reason of solidarity. There is no widely known symbolism for piercings elsewhere in the ear cartilage. Most portions of the ear cartilage can be safely pierced by an experienced professional.

Nose Piercing

The nose is traditionally pierced in two places, the first being on the side of one nostril. Generally smaller studs are placed in this spot. The second is a cartilage piercing through the septum, or the center part of the nose. This piercing has been affectionately dubbed, “the responsible facial piercing”, because if a small U-shaped bar is placed there, the piercing can be easily be turned back into the nostrils. This makes the piercing more difficult to spot.

Tongue Piercing

Tongue piercings run vertically from the upper to the lower surface of the tongue. This piercing is said to give increase pleasure during oral sex, but most people have this piercing for aesthetic purposes. With proper jewelry, this piercing will heal very quickly, but special consideration should be given when using metal jewelry. Metal can cause damage to the gums and tooth enamel.

Nipple Piercing

Nipple piercing is done equally by men and women. This is a piercing that is considered attractive. However, many also choose this piercing because it increases the sensitivity of the nipple, making sensation more pleasurable. Because individual nipple sizes vary, this piercing is more difficult for some than others. Smaller nipples are much harder to pierce. Those individuals with smaller nipples are encouraged to seek a professional with more experience in this area.

Naval Piercing

In ancient Egypt, this particular piercing was reserved solely for the pharaoh. In today’s society, this is a common piercing. This piercing is usually sported by those that want to show off their mid-drift. This piercing is more common in women than men, solely because there are styles of women’s blouses designed to show this area.

Genital Piercing

Genital piercing is popular in both men and women. Those piercing directly on or very near the sex organs amplify sensation to make stimulation more pleasurable. Some of the popular piercing sites for male genitalia include: the tip/head, at the base of the shaft at the public bone, and the scrotum. For women piercings can be placed on: the clitoris; the hood; the inner and outer labia; and the triangle.